Original 3D-printed wheel covers made to turn the most ignored thing in your driveway into the best-looking one.
Pick your Wheelie Rims from the current drop.
Your pair is 3D printed and finished to order in Perth.
Attach them to the outside face of your existing bin wheels using your preferred fixing method.
Wheelie Rims are decorative covers fitted directly to your existing wheel.
Our preferred option. Clean the wheel, apply exterior-grade silicone, position the rim and allow it to cure fully.
A quick, clean option. Use strong exterior-rated double-sided mounting tape on a clean, dry surface.
Suitable for a more permanent bond where compatible with the wheel surface and printed material.
For a mechanical fit, carefully secure through the cover into the wheel face while keeping clear of moving parts.
The important stuff. No owner's manual required.
Wheelie Rims are approximately 145 mm and designed to fit onto the outside face of common wheelie bin wheels. Check your wheel size and available flat surface before ordering.
One matching pair of Wheelie Rims — one for each side of your bin. Your existing wheels stay exactly where they are.
Fit them to the outside face of your existing wheels. We recommend exterior-grade silicone, but strong mounting tape, suitable adhesive or screw fixing can also be used depending on your wheel.
Yep. They're decorative wheel covers — your original wheels and axle still do the work. Just make sure your chosen fixing stays clear of the axle and moving parts.
They're made for wheelie bins and outdoor use. Like any 3D-printed product, long-term exposure to harsh sun, heat and weather can gradually affect the finish.
Every pair is 3D printed to order in Perth. Production and current delivery estimates are shown at checkout.
Explore the current seasonal drop and roll out with something different.
SHOP THE CURRENT DROP → PAIR OF 2 · PRINTED IN PERTH · AUSTRALIA-WIDE SHIPPING
